ievo

Customise your ievo

Through the custom kit additions you can customise your ievo readers creating a completely bespoke biometric access control system allowing greater flexibility to suit your every security need. You have the ability to create a personalised biometric access control unit to suit your specifications needs, without altering the look or design of the fingerprint readers themselves. It also gives you the opportunity to fully service your readers in case any individual elements were vandalised, damaged or in need of repair.

The custom kit is effectively our way of giving you the power to control and perfect your own biometric security system, that will open new markets, ease use and increase functionality.

Technical specification

Card Reader

If there is already an existing card reader installed at the site, then you can replace this card reader with the ievo® custom ultimate™ and micro™ option. This additional functionality allows the users to use pre-existing cards, ievo® biometrics or a combination of both (please see 1:1 template on card) typical applications include visitor access.

Power the Board and Reader via Ethernet

By using PoE to power the ievo® control board, installing an ievo micro™ or ultimate™ reader becomes faster, easier and more cost effective. There is no need to include a local mains power supply, saving on extra cabling and installation time. The ievo® reader with PoE simply plugs straight into the existing LAN using a standard RJ45 connection powered from either a PoE switch or a PoE injector. It is then detected on the network as normal.

Bluetooth Communication

Instead of using the LAN cable for a connection to the readers, you can use Bluetooth. This added benefit could save installation time and costs to the clients.

This facility can be used not only for standard communication to the ACU, but also allows engineers with the correct access rights to register fingerprints remotely. This is particularly useful for sites that require external network to signal the readers, for instance car parks and turnstiles, instead of cabling above or under ground, you can do it via wireless network communication.

Single Control Board for Read In and Read Out Biometrics

Normally for read in and read out biometrics two separate control boards would need to be purchased alongside the readers being used. Having the ability to use a single control board and adding an extra reader head means not only are costs reduced, but there will be less cabling and space used for installation.

Two Line Screen

The Network Time Protocol (NTP) clock is perfect for time & attendance systems where users want to see the date and time they scan in and out. It runs on the network, therefore date and time update automatically, meaning the date and time matches the network that the reader is operating on. 

Increase template capacity

Currently, both ievo ultimate™ and micro™ facilitate 1:N 10,000 fingerprint templates. Depending on your projects needs, you can upgrade and increase this to 50,000 fingerprint templates. This option is particularly useful for larger installation sites or multiple installs for example, gym membership systems and construction sites.

1:1 template on Card

Combining smart card technology with biometrics provides a way to create a positive binding of the smart card to the card holder, therefore providing strong verification and authentication of the card holders identity. Template is on the card as opposed to a database, thus enabling you to far exceed 50,000 users. 

Wireless Communication

Instead of using the LAN cable for a connection to the readers, you can use a Wi-Fi router. This added benefit could save installation time and costs to the clients.

This facility can be used not only for standard communication to the ACU, but also allows engineers with the correct access rights to register fingerprints remotely. This is particularly useful for sites that require external network to signal the readers, for instance car parks and turnstiles, instead of cabling above or under ground, you can do it via wireless network communication.

 

In Any Colour You Like

By simply providing ievo® with a colour RAL number we can supply you with the required number of readers to exactly match your colour.

This has proven to be essential when specifying into new builds with corporate colour requirements. We will also hold a total order percentage as backup stock of your colour reader for a future add on to your system.

Get ievo®

Ultimate/Micro/USB Reader

We are waiting to hear from you...Whether you are ready to buy or would just like some extra information on the ievo® solutions, click here for more information on how to buy.

get ievo®

Customise your ievo®

Create your very own biometric access control system through the ievo custom kit - the first and only of its kind! You have the power to build modules onto the ievo control board giving you exactly what you need for a project or client. You can add on increased template capacity, template on card or Power over Ethernet to name but a few. These additions can be used alongside both of the ultimate or micro fingerprint readers.

How to get your personalised ievo®?